The solution to tire puncture of oil tank semi trailer without spare tire

The tire of the oil tank semi trailer is equivalent to the shoes on our feet. A pair of good shoes can make us lunge like flying, but if the shoes go wrong, it will be uncomfortable to walk, heavy it may fall and even sprain the foot. It is inevitable that the tire of the tank car is punctured by sharp objects. Do you know how to deal with the tire burst? Tank car manufacturers teach you a few tricks:

First aid: shoot and repair

Z The common way to repair a tire is to insert a special rubber strip into the punctured part of the tire. The repair shop master usually calls it a shot repair. The biggest advantage of this method is that it is quick and convenient, only takes a few minutes, and there is no need to pry the tire from the underwire, and the defects of the gun type tire repair are not durable enough, in addition, it is difficult to deal with the larger wound, so it is usually only a temporary remedy.

Plugging type: paste to fill

Another way to repair a tire is to glue. The so-called bonding is to remove the injured tire from the steel ring, find the wound, paste special rubber from the inner layer of the tire, so as to complete the leak repair. The advantage of this method is that it can repair large wounds, but the disadvantage is that it is not durable enough. After a period of flooding and high-speed operation, air leakage will occur again in the repair area.

Finality: fire fill

Z thorough tire repair measures are often said to be fire. Fire repair should also pry off the tire, and then attach the special raw film to the wound, and then bake the wound with a baking machine until the raw film and tire completely fit. The advantage of fire repair is very durable, basically do not have to worry about repeated leakage. However, it also has disadvantages, that is, the technical requirements of the construction is high, because once the heat control is not good when baking, it is likely to burn the tires, serious deformation will occur, so that the damage to the tires can be large.

Tank car manufacturers point out that the method of repairing tire is various, but not panacea. If the tire wall (that is, the side of the tire) appeared more than 1 cm of the wound, or the crown of the tire was pierced by steel and other objects, causing big holes, generally Z or replace the new tire. Because, such tire is not only difficult to repair, repair after the effect is not reassuring, simply let it retire.

As for doing it yourself, many automatic tire repair agents on the market have certain effects, but at the same time there are strong limitations. For example, a repaired tire will not work if the air has already leaked out. The biggest defect of this kind of tire repair agent Z is that it has great corrosion. Whether it is steel ring or alloy rim, there will be great damage for a long time, and the direct result of this damage is that the steel ring and tire seal is not strict, resulting in air leakage.