Shengrun carbon steel stainless steel tank semi trailer series advantages

Carbon steel, stainless steel tank semi trailer advantages:

1. The design, inspection and manufacture of vehicles are strictly in accordance with GB1589-2016 "Road vehicle corridor size, axle load and quality limits", GB 7258-2017 "Technical Conditions for Motor Vehicle Operation Safety", GB 18564.1-2006 road transport liquid dangerous goods tank vehicles Part 1 Technical requirements for metal atmospheric tank, QC/T 653-2000 oil tanker, technical conditions for oil tanker, GB 20300-2006 Safety technical Conditions for Vehicles transporting Explosives and highly toxic Chemicals on Road, NBT47003.1-2009 steel welded atmospheric pressure Vessel, NB/T47013-2015 "Non-Destructive Testing of Pressure Equipment" Such as national standards, industry standards.

2. Automatic single-side welding and double-sided forming inert gas shielded welding is adopted for tank plate welding. The tank body is formed by two kinds of forming process: coil plate and envelope can. The assembly of tank body, head and wave proof plate adopts supporting tooling mold without gap clamping positioning. Automatic submerged arc welding is adopted for the outer ring weld of tank body.

3. Carbon steel and stainless steel raw materials for welding physical and chemical inspection, valve parts in strict accordance with the national standards for testing and use, tank weld according to the requirements of the national standard using X-ray flaw detection, tank and pipeline for multi-pass air tightness and hydraulic testing methods. The frame is made of "T" type high strength low carbon alloy steel stringer or "L" type one molding lightweight stringer.

4. Full bearing stainless steel tank advantages:

Light weight: the original structure is the frame in the lower part of the tank from front to back, the length of the whole longitudinal beam is longer than the tank, the tank full bearing structure will shorten the frame longitudinal beam by nearly half, each car can be light about 400Kg;

Low cost: the original structure longitudinal beam from front to back, the total weld length of the frame is about 6 times the length of the tank, the tank full bearing structure will shorten the weld length by nearly 2/3, greatly reducing the cost of special welding, at the same time, the web numerical control parts to H profile structure, but also reduce the cost of cutting, improve the utilization of materials;

Short cycle: the original structure must be completed outside the tank to manufacture the frame, and the frame manufacturing must be manufactured in accordance with the positioning of the tank, tank full bearing structure can be tank and frame manufacturing at the same time, together into the painting process, Z after the final assembly connection, the tank manufacturing cycle is shortened by 1/4;

Maintenance and detection is convenient: the original structure tank and frame is a whole, maintenance and detection will be required to lift the vehicle, tank full bearing structure if there is a problem in the frame, the frame can be separated from the tank, separate maintenance, so as to reduce the shipment of dangerous goods tank due to maintenance of safety hazards;

5. Vehicle announcement of the type of transport media covers 3 categories, 5 categories, 6 categories, 8 categories, liquid food, a total of more than 30 announcement models, more than 200 types of transport media.

6. Vehicles can be equipped with a variety of ABS brands, including Guangdong Ruili Comi Automotive Electronics Co., LTD., Guangzhou Xihe Automotive Electronic Equipment Co., LTD., Liangshanshunanda Automotive Technology Co., LTD., Shandong Haina Automotive Technology Co., LTD., Wibco Automotive Control System (China) Co., LTD.

Models :CM2XL-4S/2K(4S/2M), XH-GQ4SB2M -E01,SAD-ABS4S/2M,HNABS-4S/2M,400500XXX0; The side and rear lower protection device can be installed aluminum alloy material or carbon steel material; The connection mode of side protection and rear protection is bolted connection or welding; The outer insulation layer can choose stainless steel matte plate, galvanized plate, color coated plate, aluminum alloy plate, glass steel plate; Heat preservation method can be riveted riveting or heat preservation bandage binding: the top can be a water block type or walk table; Select a variety of wheel housing styles; Select the number and position of the installation of the ladder; Optional rear blowdown □ or screw valve; Optional rear luminaire style; Optional heating style; Select the number or location of toolbox and valve box; Select the number or location of can caps; Optional lightweight walking mechanism; Optional air suspension; According to GB 7258-2017 "Technical Conditions for Safety of Motor Vehicle Operation" requirements: all vehicles wheel covers are equipped with anti-splash device, vehicle VIN code is increased to 3, and dangerous goods vehicles are equipped with tank nameplate.

Shandong Shenrun Automobile Co., Ltd. is a special vehicle and semi-trailer announcement management enterprise approved by the Ministry of Industry and Information Technology, a pressure vessel manufacturing enterprise approved by the General Administration of Quality Inspection, a tank container manufacturing enterprise certified by China Classification Society, a council member of China Chemical Equipment Association, and a unit involved in drafting the national standard of "Safety Technical Conditions for Oil Transport Vehicles and refueling Vehicles". Shengrun Company has: International Trade Department, pressure vessel Business Department, tank truck business department, powder material tank truck business Department, semi-trailer business department.