Maintenance method of back flip dump semi-trailer

The rear-turning dump semi-trailer is optimized and designed with computer-aided design software. According to the 7 requirements of the vehicle's load-bearing quality, the finite element analysis of the frame is carried out. Scientific design, reasonable load sharing, and the same load can effectively reduce the product self-respect. So, what is the maintenance method of the rear tipping semi-trailer? The following editor will give you a brief introduction.

Back flip dump semi-trailer

     Needless to say, the engine is another core component of the dump truck. Under normal circumstances, the engine is cleaned and maintained at a maintenance cycle of 5000km. The main cleaning items are oil sludge and other sediments inside the engine. The purpose is to prevent the oil from oxidizing and thickening at high temperature, reduce the wear of engine parts, prolong the life of the engine and improve the power of the engine.

     If the brake fluid of the back-turning dump truck is between high and low, it means normal. If the brake fluid is close to the lower limit or lower than the lower limit, it means that there may be leakage in the system or excessive wear of the brake shoes, and it should be repaired at the service station in time. When adding brake fluid, pay attention to adding the same type of brake fluid to prevent damage to the cup, and pay attention to protecting the paint to prevent corrosion of the paint surface.