How to Prevent Skeleton Semi Trailer Tire Blowouts

Tires are the main components of the frame semi-trailer. In order to maintain the load and external balance of the tire, especially in summer when tire blowouts are common, we must inflate the frame semi-trailer in time.

It is also necessary to effectively install the tires of the skeleton semi-trailer. Due to the explosion of the tires of the low-bed semi-trailer, it is also possible that the tire is installed incorrectly, resulting in a tire blowout caused by the unbalanced bearing force. Therefore, in the process of driving the skeleton semi-trailer safely After driving for a period of time, it is necessary to calibrate the tires to avoid this phenomenon.

It is very necessary to carry out regular maintenance on the tires. If there are particles or laminated glass in the tires, they should be cleaned up immediately. If there are uneven thicknesses in the tires, repair them immediately. Replace the tires on time. If the tires have been used beyond a certain period, we must replace them in time. This is also a responsibility to us, and it is also a good way to maintain the car.

Regarding the damage to the clutch of the lower frame semi-trailer, I think this is a problem that many drivers of flat-bed dump semi-trailers are very concerned about. Today I will talk about how to solve this problem. If you want to solve the damage of the clutch of the skeleton semi-trailer, you must know the structure of the clutch, so that you can know where to start to solve the problem.

1. Use the first gear when starting to get a large development torque and try to avoid the load on the clutch.

2. In order to ensure better separation and integration of the clutch, the clutch pedal must be pressed to the end when using the flat-bed dump truck, and it must be completely released after use.

3. Pay attention not to put your feet on the pedal of the clutch when driving the flat-bed dump truck, which can better ensure the integration of the internal structure of the clutch.

4. When driving in road traffic and encounter situations where the speed must be reduced, it is not necessary to step on the clutch too early. Wait until the speed drops to the effective driving speed before stepping on the clutch, which can reduce the high speed of the clutch.